OTHER RECORDING FUNCTIONS
110
IMPORTANT!
• High Sensitivity is disabled automatically when any
setting other than “Auto” is selected for ISO
sensitivity. If you want High Sensitivity to be
operational after turning it on, be sure to change the
ISO sensitivity setting to “Auto” (page 142).
• Recording with high sensitivity can cause an image
to appear somewhat coarser than normal and can
cause slight deterioration of image resolution.
• A desirable level of image brightness may not be
possible under very dark conditions.
• When shooting with slow shutter speeds, use a
tripod to protect against the effects of hand
movement.
• High Sensitivity is disabled while the flash setting is
“Auto Flash”, “Flash On”, or “Soft Flash”.
• While recording with High Sensitivity, the maximum
digital zoom factor is 4X (page 65).
Shooting with High Sensitivity
Higher sensitivity makes it possible to record brighter
images, without using flash, even when there is not enough
lighting available to obtain normal exposure.
1.
In a REC mode, align the mode dial with “ ”,
and then press [SET].
2.
Use [왖], [왔], [왗], and [왘] to select the “High
Sensitivity” scene, and then press [SET].
3.
Press the shutter button to record the image.
To Next Page
Loading...
Need help?
General
