PLAYBACK
159
Adjusting White Balance of a Recorded
Image
You can use the white balance setting to select a light
source type for a recorded image, which will affect the
colors of the image.
1.
In the PLAY mode, use [왗] and [왘] to display
the image whose white balance setting you
want to change.
2.
Press [MENU].
3.
Select the “PLAY”
tab, select “White
Balance”, and then
press [왘].
• Note that the above
step is possible only
when there is a
snapshot displayed on
the monitor screen.
When you want the image to
appear like it was recorded
under these conditions:
Outdoors, fair weather
Outdoors, cloudy to rain, in
tree shade, etc.
Under very high temperatures
light, such as building shade,
etc.
Under white or daylight white
fluorescent lighting, without
suppressing color cast
Under daylight fluorescent
lighting, while suppressing
color cast
Under incandescent lighting,
while suppressing color cast
Cancel white balance
adjustment
Select this setting:
N
D
Cancel
4.
Use [왖] and [왔] to select a white balance
setting, and then press [SET] to apply it.
To Next Page
Loading...
Need help?
General
