OTHER RECORDING FUNCTIONS
140
Specifying Power On Default Settings
The camera’s “mode memory” feature lets you specify the
power on default settings individually for the flash mode,
focus mode, white balance mode, ISO sensitivity, AF Area,
metering, self-timer, flash intensity, digital zoom mode,
manual focus position and zoom position. Turning on mode
memory for a mode tells the camera to remember the
status of that mode when you turn off the camera, and
restore it the next time you turn the camera back on. When
mode memory is turned off, the camera automatically
restores the initial factory default setting for the applicable
mode.
— The following table shows what happens when you turn
mode memory on or off for each mode.
Select this setting:
On
Off
To do this:
Display guidance text when you
select an icon on the monitor screen.
Turn off Icon Help
3.
Use [왖] and [왔] to select the setting you
want, and then press [SET].
IMPORTANT!
• The icons listed below do not appear on the display
while Icon Help is turned off.
— Focus mode icon (page 79)
— White balance
AWB
icon (page 89)
To Next Page
Loading...
Need help?
General
