PLAYBACK
175
Rotating the Display Image
Use the following procedure to rotate the image 90 degrees
and register the rotation information along with the image.
After you do this, the image is always displayed in its
rotated orientation.
1.
In the PLAY mode, press [MENU].
2.
Select the “PLAY” tab, select “Rotation”, and
then press [왘].
• Note that this operation is possible only when a
snapshot image is on the monitor screen.
3.
Use [왗] and [왘] to scroll through images until
the one you want to rotate is on the monitor
screen.
• Pressing [MENU] displays a screen for configuring
slideshow settings. To restart the slideshow, press
[MENU] while the menu screen is displayed, or
select “Start” and then press [SET].
• During audio playback, you can adjust volume by
pressing [왔] and then using [왖] and [왔].
4.
To stop the Phot Stand slideshow, press
[PHOTO] again.
IMPORTANT!
• The battery is not charged while a Photo Stand
slideshow is in progress. To charge the battery, stop
the slideshow.
To Next Page
Loading...
Need help?
General
