OTHER RECORDING FUNCTIONS
116
IMPORTANT!
• Digital zoom is disabled while recording an old
photograph. However, you can use optical zoom.
• The camera will not be able to recognize an old
photograph in the following cases.
— When part of the photograph extends outside of
the monitor screen
— When the old photograph is the same color as the
background it is placed upon
• The maximum size when recording an old
photograph is 1600
×
1200 pixels, even if the camera
is configured for a larger image size. When the
camera is configured to record images smaller than
1600
×
1200 pixels, images will be in accordance
with the currently specified image size.
• Under certain conditions, restored colors may not
produce the desired results.
Recording an ID Photo
You can use this procedure to record a portrait and then
print a variety of different standard size ID photos.
• Printing an ID photo produces a single sheet containing
five ID photos of the following sizes.
30
×
24 mm (1.2˝
×
0.94˝), 40
×
30 mm (1.6˝
×
1.2˝),
45
×
35 mm (1.8˝
×
1.4˝), 50
×
40 mm (2.0˝
×
1.6˝),
55
×
45 mm (2.2˝
×
1.8˝)
1.
In a REC mode, align the mode dial with “ ”,
and then press [SET].
2.
Use [왖], [왔], [왗], and [왘 ] to select the “ID
Photo” scene, and then press [SET].
3.
On the monitor
screen, compose the
image by positioning
the subject within the
on-screen frame, and
then press the shutter
button to record an
initial temporary
image.
To Next Page
Loading...
Need help?
General
