PLAYBACK
174
Using the Photo Stand Feature
The “Photo Stand” feature lets you specify what should
appear on the camera’s monitor screen while the camera is
on its USB cradle. You can play a Photo Stand slideshow
without worrying about remaining battery power, or you can
specify display of a particular image. Photo Stand feature
operations are performed in accordance with slideshow
setting. See page 172 for information about configuring
slideshow settings to suit your needs.
1.
Turn off the camera.
2.
Set the camera onto the USB cradle.
3.
Press the USB
cradle’s [PHOTO]
button.
• This starts the Photo
Stand slideshow with
the images or image
you specified.
[PHOTO]
• Note that effect settings are disabled when the
slideshow “Images” setting is “Favorites” or “
Only”, or when the slideshow “Interval” setting is
“MAX”, “1 sec”, or “2 sec”.
• Images copied from another digital camera or a
computer may take longer time to appear than the
slideshow interval time you specify.
• If there are indicators on the display, you can clear
them by pressing [DISP] (page 33).
• When the slideshow reaches a movie while “One
Image” is selected for “Images”, the movie will repeat
playback for the time specified by for “Time”.
To Next Page
Loading...
Need help?
General
