OTHER RECORDING FUNCTIONS
99
Using the High-Speed Continuous
Shutter Mode
Holding down the shutter button while high-speed
continuous shutter is selected records up to three images
at high speed.
1.
In a REC mode, press [ ].
2.
Use [왖] and [왔] to select “ High Speed
Cont.”, and then press [SET].
• This causes “ ” to appear on the monitor screen.
3.
Press the shutter button to record.
• Recording continues as long as you keep the shutter
button depressed. Shooting stops if you release the
shutter button before three images are recorded.
Using the Flash Continuous Shutter
Mode
Holding down the shutter button while flash continuous
shutter is selected records up to three images, firing the
flash for each one.
1.
In a REC mode, press [ ].
2.
Use [왖] and [왔] to select “ Flash Cont.”,
and then press [SET].
• This causes “ ” to appear on the monitor screen.
3.
Press the shutter button to record.
• Recording continues as long as you keep the shutter
button depressed. Shooting stops if you release the
shutter button before three images are recorded.
To Next Page
Loading...
