60
BASIC IMAGE RECORDING
■ Recording Precautions
• Never open the battery cover or place the camera onto
the USB cradle while the green operation lamp is
flashing. Doing so not only causes the current image to
be lost, it can also corrupt images already stored in file
memory and even lead to malfunction of the camera.
• Never remove the memory card while an image is being
recorded to the memory card.
• Fluorescent lighting actually flickers at a frequency that
cannot be detected by the human eye. When using the
camera indoors under such lighting, you may experience
some brightness or color problems with recorded images.
• When “Auto” is selected for the ISO sensitivity setting
(page 142), the camera automatically adjusts its
sensitivity in accordance with the brightness of the
subject. This can cause some digital noise (graininess) to
appear in images of relatively dark subjects.
You can turn the AF assist light on or off. It is
recommended that you turn off the AF assist light when
recording images of nearby people, etc.
1.
In a REC mode, press [MENU].
2.
Use [왗] and [왘] to select the “REC” tab.
3.
Use [왖] and [왔] to select “AF Assist Light”,
and then press [왘].
4.
Use [왖] and [왔] to select the setting you
want, and then press [SET].
Select this setting:
On
Off
To do this:
Turn on the AF assist light
Turn off the AF assist light
IMPORTANT!
• Do not look directly at the AF assist light/REC light/
self-timer lamp or point it directly at the subject’s
eyes.
To Next Page
Loading...
Need help?
General
