OTHER RECORDING FUNCTIONS
128
7.
Point the camera at the subject and then
press the shutter button.
• This will record a movie of the length specified by the
time values you specified in steps 3 and 4.
Recording stops automatically.
• To stop recording part way through, press the shutter
button again.
IMPORTANT!
• Note that Short Movie data is continually recorded
and stored in a buffer before you press the shutter
button. Be sure to keep the camera still and pointed
in the direction of the subject for some time before
you press the shutter button to start recording.
• When a Short Movie record operation starts future
part recording, the monitor screen will show a
countdown of the remaining recording time.
Recording continues until the end of the countdown
is reached.
Select this
setting:
9 frames
1 frame
Off
To do this:
Store a capture of the
image at the point the
shutter button is pressed
to start Short Movie
recording, and display it
on a background of eight
frames
Store a capture of the
image at the point the
shutter button is pressed
to start Short Movie
recording
Turn off MOTION PRINT (no snapshot stored)
6.
Use [ì™–] and [ì™”] to select the MOTION PRINT
layout format you want, and then press [SET].
To Next Page
Loading...
Need help?
General
