PRINTING IMAGES
217
12
.
On the camera’s monitor screen, use [왖] and
[왔] to select “Print”, and then press [SET].
• This starts printing and displays the message
“Busy.... Please wait...” on the monitor screen. The
message will disappear after a short while, even
though printing is still being performed. Pressing any
of the camera’s buttons while printing is in progress
will cause the message to reappear.
• The print menu will appear when printing is
complete.
• If you selected “1 Image” in step 11, you can select
another image for printing and then repeat this step
to print.
13
.
After you are finished printing, press the USB
cradle’s [USB] button, and then turn off the
camera.
11
.
Use [왖] and [왔] to
specify the print option
you want.
• To print a single image:
Select “1 Image” and then
press [SET]. Next, use
[왗] and [왘] to select the
image you want to print.
• To print multiple images or all images: Select “DPOF
Printing”, and then press [SET]. Selecting this option
will print the images selected with the DPOF settings.
See page 212 for more information.
• You can toggle date stamping of the image on and
off by pressing [DISP]. The date stamp will be printed
when “On” is indicated on the monitor screen.
“On” indicates that date stamping is turned on.
To Next Page
Loading...
Need help?
General
