GETTING READY
36
2.
Orienting the battery with its ì™– mark pointing
towards the battery compartment, push the
stopper out of the way with the side of the
battery as you load it into the camera.
• Push the bottom of the battery, and make sure that
the stopper securely locks the battery in place.
NP-40
Stopper
3.
Swing the battery cover closed, and then slide
it in the direction indicated by the arrow.
IMPORTANT!
• Use only the special NP-40 rechargeable lithium ion
battery to power this camera. Use of any other type
of battery is not supported.
The battery is not fully charged when you use the
camera for the first time after purchasing it. You need
to charge the battery before using the camera for the
first time.
To Next Page
Loading...
Need help?
General
