OTHER RECORDING FUNCTIONS
95
1.
In a REC mode, align
the mode dial with “S”
(Shutter Speed
Priority).
2.
Press [SET] to select the shutter speed value
in the exposure panel, and then use [왗] and
[왘] to change the setting.
Shutter speed
Movement
Slow Fast
60 seconds 1/1600 second
Blurred
Stopped
• You could also press [SET] to select “EV Shift” here,
and then use [왗] and [왘] to specify an exposure
compensation value (pages 31, 88).
• If you are using manual focus (pages 31, 85), you
can also press [SET] to select “FOCUS” (manual
focus adjustment), and then use [왗] and [왘] to focus
manually.
EV shiftShutter speed
3.
Press the shutter button half way.
• This causes the camera to configure the aperture
value automatically in accordance with the shutter
speed you selected. Then it focuses the image.
• The shutter speed and aperture values on the
monitor screen will turn amber when you press the
shutter button half way if the image is over-exposed
or under-exposed.
4.
When the image is focused, press the shutter
button all the way down to record.
To Next Page
Loading...
Need help?
General
