E
40
Using Copy and Paste
You can copy text data you have input in one location, and paste it into an-
other location.
■ To copy text
1. Input the text you want to copy.
2. Press FUNCTION and then PASTE (COPY).
• The message ”COPY OPERATION COMPLETE” appears and the input
screen appears when the copy operation is complete.
• The above operation will leave the displayed text the way it is, and save
a copy of it in memory.
• Only one item can be in copy memory at one time. Performing a new
copy operation will delete any data currently in copy memory.
• All copy memory contents are deleted whenever you turn off the printer.
• Any character size and newline included in the text are automatically
replaced with spaces when the text is copied.
■ To paste copied text
1. When inputting text, press PASTE.
• This pastes the copied text at the current cursor location.
• If the text you are copying causes the maximum number of input character
limit to be exceeded, the message “TOO MANY CHARACTERS! SOME
WERE NOT PASTED” appears and some of the text is not pasted.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
