Casio KL-7400 User Manual

5
E
Operating Precautions
Observe the following precautions to ensure that the printer provides you with
the years of trouble-free operation for which it is designed.
• Avoid use in areas subjected to direct sunlight, high humidity, and temperature
extremes. Operating Temperature Range: 10°C to 35°C (50°F to 95°F)
• Battery capacity becomes lower at temperatures of 10°C (50°F) and colder.
This can cause the “LOW BATTERY!” message to appear sooner than
normal. If this happens, move the printer to a location that is within the
operating temperature range (10°C to 35°C (50°F to 95°F)).
• Never allow paper clips, pins, or other similar objects to get inside the printer
mechanism.
• Never pull on the tape with excessive force or try to push it into the cassette.
• Place the printer on a level surface when printing. A tilted surface can make
normal printing impossible.
• Unclear printing can indicate a dirty print head. If printing becomes unclear,
use the procedures on page 49 to clean the print head and rubber roller.
• Using the printer in an area that is exposed to direct sunlight or any other
source of bright light can cause malfunction of its optical sensor, and display
of an error message. Use the printer in an area that is not exposed to bright
light.
Contents
Safety Precautions ................................................................ 1
Operating Precautions.......................................................... 5
Unpacking .............................................................................. 7
Part 1 - Getting Ready........................................................... 8
General Guide........................................................................ 8
Printer Operation Flow ......................................................... 9
Power Requirements .......................................................... 10
Using the AC Adaptor ..................................................... 10
Initializing Printer Memory ................................................. 11
To initialize printer memory ............................................. 11
Powering Up ........................................................................ 11
To turn power on and off ................................................. 11
Auto Power off ................................................................. 11
Mode Selection Basics .................................................... 12
Loading and Removing a Tape Cartridge.......................... 13
To load a tape cartridge .................................................. 13
To remove the tape cartridge from the printer ................. 14
Using the Printer’s Keys ..................................................... 15
Display Symbols and Indicators ........................................ 16
Part 2 - Label Printing Basics ............................................ 17
Tape Cut Modes .............................................................. 20
Types of Tape Cuts .......................................................... 20
Cut Modes ....................................................................... 20
Cut Modes and Margins .................................................. 22

Casio KL-7400 Specifications

General

Color	Yes
Printing colors	Black
Print technology	Direct thermal
Vertical printing	No
Maximum resolution	200 x 200 DPI
Maximum print height	24 mm
Maximum print size	-
Product color	Silver
Keyboard layout	QWERTY
Connectivity technology	Wired
Dimensions (WxDxH)	202 x 216 x 64.5 mm
Print sizes included	1x1 - 4x4
Battery type	AA
Battery technology	Alkaline
Power requirements	AC
Number of batteries supported	8
Tape cutting	Automatic
Number of printing lines (max)	3

Weight and Dimensions

Depth	216 mm
Width	202 mm
Height	64.5 mm
Weight	750 g