Casio KL-7400 User Manual

55
E
Message See page: Cause and Action
PRINT ERROR!
CHECK THE TAPE
CARTRIDGE!
THIS IS THE WRONG
TYPE OF TAPE
CARTRIDGE!
• You are using magnetic tape
and the cut mode is CONT
HALF CUT, FULL+HALF
CUT, or FULL CUT.
➜ Change the cut mode to
UNCUT before printing.
* If the steps described above
do not clear the error
message, contact your
retailer or your nearest
CASIO service center.
• The cassette cover is not
closed completely.
➜ Close the cassette cover.
• The label you are trying to
print or recall is not compat-
ible with the currently loaded
tape cartridge.
➜ Turn off the printer and
replace the tape cartridge.
• You replaced the tape
cartridge while the printer
was turned on.
➜ Turn off the printer and
replace the tape cartridge.
20
13
• Pasting copied text will cause
the number of characters to
exceed the allowable limit for
the location where you are
pasting.
➜ Re-input so the pasted text
does not cause the allowable
number of characters to be
exceeded.
• Printing with a frame will
cause your label to have
more than the allowable
number of lines.
➜ Decrease the number of
lines or change to a wider
tape.
• You are trying to print a label
that has more than the
allowable number of lines.
➜ Decrease the number of
lines or change to a wider
tape.
Message See page: Cause and Action
TOO MANY
CHARACTERS!
SOME WERE NOT
PASTED
TOO MANY LINES TO
FRAME!
TOO MANY LINES!
40
34
28

Casio KL-7400 Specifications

General

Color	Yes
Printing colors	Black
Print technology	Direct thermal
Vertical printing	No
Maximum resolution	200 x 200 DPI
Maximum print height	24 mm
Maximum print size	-
Product color	Silver
Keyboard layout	QWERTY
Connectivity technology	Wired
Dimensions (WxDxH)	202 x 216 x 64.5 mm
Print sizes included	1x1 - 4x4
Battery type	AA
Battery technology	Alkaline
Power requirements	AC
Number of batteries supported	8
Tape cutting	Automatic
Number of printing lines (max)	3

Weight and Dimensions

Depth	216 mm
Width	202 mm
Height	64.5 mm
Weight	750 g