58
Playback
The Trim function allows you to trim an image to another image size. This function is
only available for still images.
To trim an image:
1. Set the camera to Playback mode p.
2. Use the 4 or 6 keys to scroll and select an image to trim.
3. Press the Menu button to launch the Playback menu.
4. Select Trim. The Trim screen layout is displayed on the LCD monitor.
5. Use the Zoom button to change size as zoom in/out.
6. Use the navigation controls to move the image.
7. Press the OK button to apply changes. A menu selection appears.
8. Select an available setting.
• Overwrite: Save and replace the old file with the new one.
• Save As: Save the new file as a new one.
• Cancel: Cancel Trim.
9. Press the OK button to save/cancel changes.
NOTE
• Trim function is not available for images with image size set to VGA.
• All images will be trimmed in 4:3 ratio regardless of its original image ratio.
Trim
No. Description
1 Enlarged image
2 4-way indicator
3 Trimmed size
4
The approximate location of the trimmed
area
5 Image area
To Next Page
Loading...
Need help?
General
