Casio XW-P1 - Drawbar Position 5 1;3(47 H)(Drawbar Tone Selected); Release Time (48 H); Drawbar Position 8(48 H)(Drawbar Tone Selected); Attack Time (49 H)

7.15 Drawbar Position 5 1/3’(47H)(Drawbar tone selected)
Note : This message is valid only when a drawbar tone is selected for the MIDI channel.
Message Format: BnH 47H vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1 : For information about the relationship between setting values and send/receive values, see the “39.5 Drawbar
Position Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send Sent when a drawbar 5 1/3’ is operated.
Receive Receipt changes the drawbar 5 1/3’ position.
7.16 Release Time (48H)
Message Format: BnH 48H vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1 : For information about the relationship between setting values and send/receive values, see the “39.2 –64 - 0 - +63
Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Receive Receipt makes a relative change in the time it takes for a note to decay to zero after a key is
released.
7.17 Drawbar Position 8’(48H)(Drawbar tone selected)
Note : This message is valid only when a drawbar tone is selected for the MIDI channel.
Message Format: BnH 48H vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1 : For information about the relationship between setting values and send/receive values, see the “39.5 Drawbar
Position Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send Sent when a drawbar 8’ is operated.
Receive Receipt changes the drawbar 8’ position.
7.18 Attack Time (49H)
Message Format: BnH 49H vvH
n: MIDI Channel Number
vv: Value (Note1)
17