38.17 Delay
Parameter Number Parameter Name Value Notes
Parameter7[1] Delay Time 00 - 7F Note1
Parameter7[2] Feedback 00 - 7F
Parameter7[3] Ratio Lch 00 - 7F
Parameter7[4] Ratio Rch 00 - 7F
Parameter7[5] Wet Level 00 - 7F Note2
Parameter7[6] Type 00 - 7F Note3
Parameter7[7] Tempo Sync 00 - 7F Note4
Note1 : For information about the relationship between setting values and send/receive values, see “39.11 Delay Level
Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Note2 : For information about the relationship between setting values and send/receive values, see “39.12 Delay Type
Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Note3 : For information about the relationship between setting values and send/receive values, see “39.7 Tempo Sync
Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
38.18 Reflection
Parameter Number Parameter Name Value Notes
Parameter7[1] Type 00 - 7F Note1
Parameter7[2] Feedback 00 - 7F
Note1 : For information about the relationship between setting values and send/receive values, see “39.17 Reflection Setting
Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
38.19 Rotary
Parameter Number Parameter Name Value Notes
Parameter7[1] Od Gain 00 - 7F Note1
Parameter7[2] Od Level 00 - 7F
Parameter7[3] Speed 00 - 7F Note2
Parameter7[4] Brake 00 - 7F Note3
Parameter7[5] Fall Accel 00 - 7F
Parameter7[6] Rise Accel 00 - 7F
Parameter7[7] Slow Rate 00 - 7F
Parameter7[8] Fast Rate 00 - 7F
Note1 : For information ab out the relationship between setting values and send/receive values, see “39.8 0-3 Setting Value
Table” in “VIII Setting Values and Send/Receive Values” of this document.
Note2 : For information about the relationship between setting values and send/receive values, see “39.20 Slow/Fast Setting
Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Note3 : For information about the relationship between setting values and send/receive values, see “39.19 Rotate/Brake
Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
92
To Next Page
Loading...
