Casio XW-P1 - Drawbar Position 2(4 BH)(Drawbar Tone Selected); Vibrato Rate (4 CH); Drawbar Position 1 3;5(4 CH)(Drawbar Tone Selected); Vibrato Depth (4 DH)

7.22 Drawbar Position 2’(4BH)(Drawbar tone selected)
Note : This message is valid only when a drawbar tone is selected for the MIDI channel.
Message Format: BnH 4BH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1 : For information about the relationship between setting values and send/receive values, see the “39.5 Drawbar
Position Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send Sent when a drawbar 2’ is operated.
Receive Receipt changes the drawbar 2’ position.
7.23 Vibrato Rate (4CH)
Message Format: BnH 4CH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1 : For information about the relationship between setting values and send/receive values, see the “39.2 –64 - 0 - +63
Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Receive Receipt changes the note vibrato rate.
7.24 Drawbar Position 1 3/5’(4CH)(Drawbar tone selected)
Note : This message is valid only when a drawbar tone is selected for the MIDI channel.
Message Format: BnH 4CH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1 : For information about the relationship between setting values and send/receive values, see the “39.5 Drawbar
Position Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send Sent when a drawbar 1 3/5’ is operated.
Receive Receipt changes the drawbar 1 3/5’ position.
7.25 Vibrato Depth (4DH)
Message Format: BnH 4DH vvH
n: MIDI Channel Number
vv: Value (Note1)
19