Casio XW-P1 - Page 47

Category Transfer
ID (c) Parameter Set Individual Parameter One-way Bulk Handshake Bulk
00H System A - -
02H Patch A A A
03H Tone A A A
05H Melody A A A
06H Drum A A A
07H Drawbar(XW-P1 only) A A A
08H Hex Layer(XW-P1 only) A A A
09H Solo Synth A A A
0AH User Wave(XW-G1 only) A A A
13H DSP A A A
1FH All F A A
26H Step Sequencer F A A
27H Step Sequencer Chain F A A
28H Arpeggio F A A
29H Phrase F A A
2AH Spec A A A
A · · · Available (Also including when only some parameters are available.)
F · · · File Information (Not the data itself. Name, size, and other file information only.)
- · · · Not Available
16.3.7 mem : Memory Area ID
Format: 0mmmmmmmB
Specifies the memory area that is the object of the parameter transfer. The following are defined for
this Instrument.
mem Data Type Meaning
0 User area Read/write enabled
1 Preset area Read/write disabled
2 Store area Read/write enabled
16.3.8 pset : Parameter Set Number
Format: LSB 0nnnnnnnB
MSB 0mmmmmmmB
This field is a 2-byte (LSB, MSB) value indicating the number of the parameter set (mmmmmmmnnnnnnnB,
Binary) being transferred.
16.3.9 blk Block Number
The block number is a supplementary number that specifies which block parameter is to be accessed
when there are multiple blocks (instrument parts, etc.) that include parameters with the same ID within
a single parameter set. The array structure of a block can be expressed up to 4 dimensions, and the size
of a 1-dimensional array is expressed as 14 bits.
47