CDVI DIGIWAY PLUS - Page 33

INSTALLATION MANUAL
EN
DIGIWAY PLUS
13
Installing Manufacturer: (Name of the company who installed the Automatic Door Operator)
Identication: (Identity of the door that has been automated such as door location or serial number)
Site (Details of the building where the door operator has been installed)
Address
Owner refs
Company
Address
Installer name
Installer signature
Installer Details: (Information of the installer and company)
Date of completion of the installation: _______________
Brand
CDVI
Series
Digiway PLUS
Type
Part Name
Serial Number
Manufacturing date
Identication of the power operated drive units:
Identication of any protective devices: (Includes photocells/safety mats/operation modes etc.)
Installation manual : _________________________________
NOTE: the installation of the power operated pedestrian door must be completed with the risk assessment and risk reduction. Find hereunder the list
of the main mechanical hazards. More hazards can be found on Annex L of the Standard EN16005.