CDVI DIGIWAY PLUS - Machinery Directive; Instructions of Use; Declaration of the Manufacturer

INSTALLATION MANUAL
EN
DIGIWAY PLUS
5
cdvi.com
cdvigroup.com
Machinery Directive
Automatic pedestrian doors fall into the application eld of the Machinery Directive (2006/42/CE).
This provides that the installer who motorizes a door becomes the manufacturer of a machinery and so he must:
1. Prepare the Technical Construction File (which must contain the documents indicated in Annex V of the Machinery Directive) and must
be kept and placed at the disposal of competent national authorities for at least ten years from the date of manufacture of the motorised
door.
2. Draft the EC Declaration of Conformity in accordance with Annex II-A of the Machinery Directive
3. Afx the CE marking on the power operated door in accordance with point 1.7.3 of Annex I of the Machinery Directive.
The installer must consign to the customer the following documents :
1. Instructions on how to operate and safely use the system.
2. Routine maintenance instructions.
3. Declaration of conformity.
4. Maintenance register.
Instructions for use
The operator DIGIWAY type DWPS102XX, DWPD102XX belongs to the Service Class 5 ( 600 cycles a day for 5 years min).
Applications : HEAVY DUTY, for pedestrian accesses to institutional complexes with very intense use.
Declaration of the Manufacturer
( according to Directive 2006/42/CE, Annex II part B )
The Manufacturer
CDVI WIRELESS SPA - CDVI Group
Via Piave,23
31020 S.Pietro di Feletto (TV)
ITALY
Herewith declares that the automatic operator for swing doors
Brand : DIGIWAY
Model : DIGIWAY PLUS
Types : DWPS102XX, DWDP102XX
- constitutes a “partly completed machinery” and it is intended to be incorpored into machinery or to be
assembled with other machinery to constitute a machinery covered by Directive 2006/42/CE;
- complies with the following Directives :
2006/95/CE ( Low Voltage Directive )
2004/108/CE ( Electromagnetic Compatibility Directive )
2014/53/UE ( RED )
European Standard EN16005 : Power Operated doorsets - Safety in Use
- it is not allowed to put the machinery into service until the machinery into which it has to be incorporated or
of which it has to be a component has been found and declarated to be in compliance with the provisions of the
Directive 2006/42/CE.
S.Pietro di Feletto, 01/11/2017
G. Massimo Dalle Carbonare
( Product manager )