CEM MARS 6 iWave User Manual

24
Users
• Basics: Ability to run methods only, no create, edit, or delete capability.
NOTE
Every system must maintain at least one Administrator.
8. Enter and conrm desired password.
9. Select “Add.” Additional users can be added at this time.
Edit/Delete User
Only an administrator can edit/delete a user.
1. Select the System Settings icon in the bottom right corner of the screen.
2. Select Settings.
3. Select Users.
4. Scroll down until the “Users” section appears.
5. Select the Edit icon or Delete icon.
• If Edit is selected, make the appropriate changes, and select the Save icon.
• If Delete is selected, conrm that the user wishes to delete the selected user.
Auto Login
Only an administrator can change the Auto Login to on/off.
1. Select the System Settings icon in the bottom right corner of the screen.
2. Select Settings.
3. Select Users.
4. “Auto Login” can be toggled on and off.
• If Auto Login is set to “ON”, the operator will have to choose a user and login each time the system is
powered on.
• If Auto Login is set to “OFF”, the Home Screen will be displayed once the MARS 6 completes the initial
power up.

CEM MARS 6 iWave Specifications

General

Brand	CEM
Model	MARS 6 iWave
Category	Laboratory Equipment
Language	English