35
Software Update
Software Update
How to Update Software
The MARS 6 software/rmware should be updated when a revised version is released. The software/rmware can
be obtained from CEM’s website www.cem.com. One user should be responsible for updating the software.
1. Using a computer, create a folder titled “CEM” on the USB.
2. Download the MARS 6 software and copy into the “CEM” folder on the USB.
3. Insert USB containing the software update bundle (*.cib) into the MARS 6 USB port.
4. Select the System Settings icon in the bottom right corner of the screen.
5. Select Tools.
6. Select “Update Manager.”
7. Select the available software version and highlight the latest software version.
8. Toggle the “Force Update” to “No.”
9. Select “Install.” The software will begin updating, and the system will automatically restart.
NOTE
The software may power the instrument on/off several times during the installation process. The update
may take as long as 30 minutes to complete. The update is complete when the home screen is displayed.
10. Upon restart, verify the software version. Select the “System Settings” > “Settings” > “General” > “System
Information.”
To Next Page
Loading...
Need help?
General
