CEM MARS 6 iWave User Manual

32
Calibrations
CAUTION
DO NOT use a MARSXpress Plus turntable. The turntable will not be properly aligned.
2. Select the System Settings icon in the bottom right corner of the screen.
3. Select Tools.
4. Select the “Turntable” tab.
5. Place the MARSXpress turntable or turntable calibration tool on the turntable drive lug and press “Start.”
6. Once the alignment process is complete, there will be three (3) possible outcomes:
• “Turntable is Aligned” - No alignment is required.
• “Turntable is not aligned. It is recommended to save the turntable offset of +/-XXX. Do you wish to save?” -
Save the new offset value to align the turntable.
• “Turntable is not aligned. Mechanical alignment is required for turntable offset of +/-XXX.” - DO NOT continue
operating the MARS 6 instrument. Contact your CEM Representative for assistance.

CEM MARS 6 iWave Specifications

General

Brand	CEM
Model	MARS 6 iWave
Category	Laboratory Equipment
Language	English