To Next Page

To Previous Page

Glossary

Classic Method Methods created by the user. Creation of a method requires training and knowledge.

iWave Contactless, volume-independent sensors accurately measure temperature of all sealed vessels during the

run.

One Touch Methods created by CEM Applications Specialists. Determines all of the parameters, adjusts power output,

and performs the digestion for all major sample types.

MAXPower™ Aborts the run if full programmed power is applied continuously over a specied period of time.

ReactiGuard Continuously monitors the cavity and disables the magnetron if disturbances occur inside the cavity.

TempGuard™ Safety feature for measurement of temperature inside each vessel in the system. If the temperature in

any vessel surpasses the maximum allowable temperature programmed during a method, the instrument

software stops microwave production and indicates the position of the vessel in which the temperature has

exceeded the programmed limit. As of software version 1.49, all TempGuard parameters are preset to CEM

factory settings.

Questions and Answers:

Need help?

Do you have a question about the CEM MARS 6 iWave and is the answer not in the manual?

CEM MARS 6 iWave Specifications

General