CEM ORACLE User Manual

6
3. Remove the six screws from the sides of the magnet shipping container.
4. Lift the top from the shipping container.
5. With two people positioned on the sides of the magnet container - one on each side - use the straps and
carefully lift the magnet from the skid and place it on the workbench. The magnet weighs approximately
120 pounds (55 kg).

CEM ORACLE Specifications

General

Brand	CEM
Model	ORACLE
Category	Measuring Instruments
Language	English

Summary

Safety Precautions

Safety Guidelines and Warnings

System Installation

Unpack System

Instructions for safely removing the ORACLE instrument from its shipping carton and placing it.

Cable Connections

Guidance on connecting various cables between the ORACLE, processor box, and magnet.

SMART 6 Connection

System Setup

Procedure for initial system configuration, including import of clone files and diagnostics.

Sample Analysis Procedures

Sampling and Preparation Basics

ORACLE Station Sample Preparation

Heater Block Sample Conditioning

QuikPrep Heater Operation

Overview of the integrated heater for rapid sample conditioning and automatic transfer.

Batch Testing with Oven

QuikPrep Analysis with SMART 6

Instructions for performing fat analysis using the SMART 6 for sample preparation and drying.

SMART 6 Method Development

Data Management and Reporting

Internal Data Storage and Retrieval

System Maintenance and Diagnostics

Quality Control and Calibration

Ensuring system functionality via QC tests, calibration, and Certified Reference Materials (CRM).

Magnet Stability and Diagnostics

Tests for magnet stability and running system diagnostics for optimal performance.

Routine Maintenance Schedule

System Settings and Configuration

Sample Settings Adjustment

System and Network Settings

Service and Repair

Coreboard Connectivity Configuration

Steps to configure ORACLE connectivity with the coreboard, including IP address settings.