To Next Page

To Previous Page

QuikPrep Analysis on the ORACLE with an Air or Vacuum Oven

Before beginning any sample testing, ensure the product has been fully and properly prepared in order to obtain the

best results. Improper sample preparation or tempering can reduce accuracy and repeatability. For further

information on sample preparation, please refer to the standard reference procedure, or contact CEM Corporation

Process Application Support (800) 726-3331.

QuikPrep refers to the integrated heater located on the top of the ORACLE magnet. It allows the user to rapidly

condition the sample to the necessary temperature, providing the final result much quicker than a standard

temperature conditioning with an external heater block. The QuikPrep will automatically transfer the sample into

the ORACLE for analysis at the end of its conditioning time, and is beneficial to users that require faster individual

results, but requires slightly more hands on time from the user.

When testing with an Air Oven, the user can choose to use the ORACLE to record the initial weights of the samples

that will be analyzed, or use a separate balance to record the initial weights and manually input them into the

ORACLE after the sample moisture is recorded.

1. On the ORACLE, press the menu icon and choose

Run.

2. Press the large Run arrow to begin the sample

analysis procedure

Other manuals for CEM ORACLE

Questions and Answers:

Need help?

Do you have a question about the CEM ORACLE and is the answer not in the manual?

General