50
QuikPrep Analysis on the ORACLE with a SMART 6
Before beginning any sample testing, ensure the product has been fully and properly prepared in order to obtain the
best results. Improper sample preparation or tempering can reduce accuracy and repeatability. For further
information on sample preparation, please refer to the SMART 6 video on sample preparation, or contact CEM
Corporation Process Application Support (800) 726-3331.
1. Starting from the home screen of the SMART 6,
choose either Classic Method or One Touch Method,
based on the method you will be running.
For an explanation on the difference between
Classic and One Touch Methods, please refer to the
Method Creation and Editing section of the manual.
The ORACLE software will instruct you to begin the
test through the SMART 6 Moisture analyzer. If using
a SMART 6 to test samples for moisture prior to
using the ORACLE for Fat analysis, all keystrokes are
done through the SMART 6 software interface.
2. From the list of methods, choose the ORACLE
method that has been developed for the sample
that will be analyzed.
Method icons will differ based on the type of
analysis. ORACLE methods, which analyze moisture
and fat, will contain an icon of the ORACLE magnet.
To Next Page
Loading...
Need help?
General
