To Next Page

To Previous Page

SMART 6 Connection

This section is for users with a SMART 6 system. If not using a SMART 6 to dry the sample prior to ORACLE

analysis, please continue to the

System Setup section.

1. After following instructions in the SMART 6 manual to

set the system up, go to the Main Menu and choose

Settings, then while on the System tab scroll to the

bottom until the Trac IP Address option appears.

2. Touch the IP Address entry bar and type the following IP

address into the system. Once correctly entered, press

the Save icon in the top right corner.

192.168.1.10

3. Once the SMART 6 IP Address has been set, go to the

ORACLE after it has been turned on and the software has

appeared. Then log in under the Administrator user. The

password (case-sensitive) is:

oracleadmin

Other manuals for CEM ORACLE

Questions and Answers:

Need help?

Do you have a question about the CEM ORACLE and is the answer not in the manual?

General