62
1. In order to export any data from the ORACLE, a
suitable USB must first be plugged into one of the
ports on the front of the ORACLE Processor Box.
2. Once a USB has been plugged in and selected on
the screen, the user should select Sample Results
to export the results from the ORACLE in a .csv
format, which can be easily imported into and
review in an Excel spreadsheet or similar database.
Users have the option to export results that are
individually chosen, filtered by certain variables, or
export all data on the system.
ORACLE Maintenance
CEM recommends running full “Diagnostics” once per month to ensure your ORACLE is operating at peak
performance. Diagnostics tests all electrical components of the system to verify that the magnet and processor
(computer) are properly operating. Additionally, the ORACLE includes several “QC Tests” as outlined below that can
be utilized to verify samples are within specification, as well as magnet stability.
QC Tests
The ORACLE provides a series of QC Tests that allow the user
to ensure total system functionality, verified using Certified
Reference Materials, sealed check standard tubes, and short
and long term magnet stability.
The QC Tests can be accessed through the Main Menu by
choosing Maintenance. Each test can be individually run, and
each vary in length of analysis time and the frequency of
which they should be performed.
To Next Page
Loading...
Need help?
General
