CEM ORACLE User Manual

49
6. If there is an ORACLE tube from a previous analysis in
the ORACLE, it must first be removed.
7. Place the ORACLE tube in the QuikPrep heater at the
top of the ORACLE magnet. QuikPrep contains a
sensor that will automatically detect the sample is
present, and begin heating the sample for a
predetermined length of time.
8. Once the QuikPrep temperature conditioning is
complete, the ORACLE will automatically drop the
sample into the ORACLE magnet, and begin running
a set number of scans on the sample. After35
seconds of analysis, the ORACLE will provide the final
% Fat result.

CEM ORACLE Specifications

General

Brand	CEM
Model	ORACLE
Category	Measuring Instruments
Language	English