· Lighting and vision
· Driver sun visor
· Equipment completeness
• Before starting vehicles that have been parked for a long time, they must be
inspected and maintained according to the inspection and maintenance
standards of new vehicles, drain the oil and water stored, and refill the
lubricating oil and grease necessary for normal use.
Tire Pressure
Before starting the vehicle, carefully check the tire pressure. The specification of the
spare tire is the same as that of the vehicle. The air pressure varies according to the
brand and model of the tire.
• The tire pressure shall be kept within the specified range. If the tire pressure
is too high, it will accelerate wear and shorten the tire life; if the air pressure
is too low, cracks will occur, which will affect the driving speed of the vehicle
and increase the power consumption.
• Normal tire specifications and patterns shall be consistent.
• Carry out regular tire rotation.
• The tire pressure shall be controlled according to the pressure mark on the
tire tread.
Lighting and Vision
Check and clean the exterior of the lamp body and check whether the lamp cover is
damaged.
Observe whether the cleanliness of the windows and front and rear windshields
will affect the vision and the observation of the rearview mirrors, and carry out
necessary cleaning.
To Next Page
Loading...
