Periodic Safety Checks Outside The Vehicle
Tires
Examine tires for excessive tread wear and uneven wear patterns. Check for
stones, nails, glass or other objects lodged in the treads or sidewalls. Inspect the
treads for cuts and cracks. Inspect sidewalls for cuts, cracks, and bulges. Check the
wheel nuts for tightness. Check the tires for proper cold inflation pressure.
Lights
Have someone observe the operation of brake lights and exterior lights while you
work the controls. Check that the turn signals and high beams are in working
order.
Door Latches
Check for proper closing, latching, and locking.
If any of the items have issues or problems, take your vehicle to an authorized
Cenntro service center.
Vehicle Loading
Certification Label
As required by National Highway Traffic Safety Administration regulations, your
vehicle has a certification label affixed to the driver’s side door or pillar.
This label contains the month and year of manufacture, Gross Vehicle Weight
Rating (GVWR), Gross Axle Weight Rating (GAWR) front and rear, and Vehicle
Identification Number (VIN).
A Month-Day-Hour (MDH) number is included on this label and indicates the
Month, Day and Hour of manufacture. The bar code that appears on the bottom of
the label is your VIN.
Gross Vehicle Weight Rating (GVWR)
The GVWR is the total permissible weight of your vehicle including driver,
passengers, vehicle, options and cargo. The label also specifies maximum
capacities of front and rear axle systems (GAWR). Total load must be limited so
GVWR and front and rear GAWR are not exceeded.
To Next Page
Loading...
