disassembling the system cables.
» If the system operation and maintenance personnel have any questions
about the operation and maintenance of the equipment, please contact the
manufacturer for consultation. Don't take it for granted. There are high voltage
and low voltage lines connected between battery boxes. Non-professional
personnel are not allowed to unpack and carry without authorization.
Anti-lock Braking System (ABS)
ABS is an active safety system, which can significantly improve driving safety.
Compared with the conventional braking system, the main advantage of the ABS
system is that when braking, it can prevent the wheels from being locked and
slipping even when emergency braking on a smooth road surface, thus ensuring
the steering control performance and vehicle stability to the maximum extent.
• The function of the ABS system is limited by the road adhesion of the wheels.
Therefore, it is important to remember that once the wheels are found to
have a tendency to lock when driving on wet or smooth roads, the vehicle
speed should be reduced to adapt to the road and traffic conditions, and the
limited safety function provided by ABS should not be used to take risks.
• Once the ABS system is faulty, the anti-lock braking system warning lamp
will be on. However, it does not affect other braking devices except ABS, and
other braking devices still work, and such vehicles should be repaired as
soon as possible.
• Don't mistake the ABS system for shortening the braking distance under any
circumstances. In some cases, such as driving on gravel roads or smooth
roads with snow (usually slow down and drive carefully), the braking
distance may be longer.
ESC
What is ESC
ESC is the abbreviation of "Electronic Stability Control". ESC is a set of active safety
system based on ABS (ABS+ESC). On the basis of the original ABS system, the
steering angle sensor SAS used to monitor the driver's intention to adjust the
steering wheel, the yaw rate sensor YRS used to monitor the body's motion attitude,
the relay valve AEBS used to achieve active air supply and pressure regulation, and