• ABS systems produced by different manufacturers have different fault codes.
Please refer to the corresponding ABS user manual for fault inspection.
Self-check and Setting of Driving Recorder
Please follow the instructions provided by the manufacturer of the driving recorder.
Self-test of the driving recorder: the driving recorder starts self-test when it is
powered on. When the driver is prompted to enter the password on the display
screen, the self-test is completed.
Setting of the driving recorder: for the setting of the driving recorder, please refer to
the operating instructions of the driving recorder issued with the vehicle.
• It is forbidden to sprinkle water on the display, printer and host of the driving
recorder to avoid damaging the driving recorder.
• If the driving recorder fails to complete the self-test or makes an error
during the self-test, please go to the CENNTRO authorized service center for
maintenance in time.
Wiper and Washer Inspection
Check the function and condition of wipers and washers.
Check the working conditions of wipers and washers according to the chapter of
"Combined switch". If wipers and washers cannot work normally, please go to the
CENNTRO authorized service center for maintenance in time.
Check the fluid level in the reservoir and fill it if necessary.
Before the start of cold season, antifreeze should be mixed.
Visual Field Inspection and Adjustment (Electric Exterior Rearview
Mirror)
Check whether the mirror surface angle of the rearview mirror can obtain the ideal
vision. If the mirror surface angle changes due to wiping the mirror surface, body
vibration and other reasons, please adjust it in time.
To Next Page
Loading...
