CENNTRO LOGISTAR 400 - Page 126

4
Maintenance
115
Maintenance
Ite
ms
S/N
Work content
Technical requirements
Brake
6
Check braking
The service brake and parking
control and
performance
brake have good performance,
pipeline
are installed and connected
firmly, and each brake pipeline
has no air leakage;
Requirements after parking
brake clearance adjustment:
after adjustment, the brake
drum can rotate freely without
touching the shoe.
Suspension
7
Check and
The bolts shall be installed
system
fasten the
firmly and tightened regularly
U-bolt and
according to the required
leaf spring pin
torque.
fastening bolt
8
Check
It is firmly installed, free of
the shock
oil leakage and effective; the
absorber
support shall be free of cracks,
the rubber sleeve of the shock
absorber shall be intact, and
the shock absorber fixing bolts
shall be fastened.
9
Check
It is firmly installed, and the
stabilizer bar
rubber pad is intact, and there
is no crack.
Driver
10
Check driver
The driver and front
and front
passenger's
doors
and front
passenger's
doors
passenger's doors are in good
condition, the door opening
and closing position is correct,
the locking mechanism is
normal, there is no looseness
or jamming, and the door is
sealed well.