The motor has stable
performance and works
normally without abnormal
sound and looseness;
Every
59500 miles
(9600 km)
The connecting wire of high
and low voltage harness shall
be firm without looseness; the
cooling water circuit
of the motor shall be free of
water leakage, and the
pipeline fasteners shall be
free of looseness;
The motor cooling water pump
and fan work normally without
abnormal noise;
The wiring harness around the
motor is arranged neatly and
fixed firmly.
Clean the bearing and drain
the water, check the radial
clearance of the bearing, and
replace the bearing
if it reaches the limit wear
clearance.
The device is complete, firmly
installed, and the surface is
clean;
Every 59500
miles
(9600 km)
The information displayed is
normal, and the parameters
meet the technical
requirements;
The connecting wire and
connector are in good
condition, and the plug and
socket are in good contact.
The resistance at both ends
of the CAN line is 60 Ω.
To Next Page
Loading...
