14. Insert the batteries with the correct polarity (see
Figure).
Use only the Energizer Ultimate Lithium 1,5V AA
batteries.
Notes on the meaning of signalling after battery
insertion can be found in the section
"Maintenance" on page91.
15. Twist the cables and push them between the
batteries to avoid jamming of the cables.
16. Use a master media or locking media to check at the
OUTSIDE FITTING, whether the handle set reads the
media.
Long shield ILS Page 31 of 141
4.5 Assembling basic version (for Long shield holes)
Overview: Master media usage
Help & troubleshooting Technical data Maintenance & disposal Operation Administration
Assembly
Basics
To Next Page
Loading...
