15. Insert the batteries with the correct polarity (see
Figure).
Use only the Energizer Ultimate Lithium 1,5V AA
batteries.
Notes on the meaning of signalling after battery
insertion can be found in the section
"Maintenance" on page91.
16. If the CABLES ARE protruding, twist and push these
between the batteries to prevent jamming.
17. Use a master media or locking media to check at the
OUTSIDE FITTING, whether the handle set reads the
media.
Page 44 of 141 Long shield ILS
4.6 Assembly Option S (for Short shield holes)
Overview: Master media usage
Help & troubleshooting Technical data
Maintenance & disposal
Operation Administration
Assembly
Basics
To Next Page
Loading...
