4.7.1 Scope of delivery Long shield ILS wide shield
1 1 Outside fitting, pre-assembled with outside lever handle, coupling module and e-module
2 1 Assembly plate of inside fitting, pre-assembled with inside lever handle
3 1 Inside shield of inside fitting
4 1 Fixture ring
5 1 Square spindle
6 4 Washers (for fixing screws)
7 4 Locking nuts (for fixing screws)
8 3 Fixing screws without cable slit (with fixing rings)
9 1 Fixing screw with cable slit (with fixing ring)
10 2 Batteries Energizer Ultimate Lithium 1,5V AA
11 1 Battery module
12 1 Installation tube
13 1 Support frame
14 1 Spring clip (only for handle sets without a PZ hole)
Long shield ILS Page 47 of 141
4.7 Assembling wide shield (for rosette-holes)
Overview: Master media usage
Help & troubleshooting Technical data Maintenance & disposal Operation Administration
Assembly
Basics
To Next Page
Loading...
