The RF-Stick-Master must first be authorised for all locking devices on which it is to be used
(see "Authorising additional master media" on page111). Each RF-Stick-Master that has
been authorised once is compatible with every RF-Stick of a OMEGA FLEX system.
Procedure for creating programming jobs:
1. Start the OMEGA Client and log in with your user name and password.
2. Set the desired changes in the OMEGA Client.
3. Start your changes accordingly as a change programming or new programming, e.g.
through PROGRAMMING > PROGRAM ALL CHANGES.
The status display of the OMEGA Client shows now "programming required". The individual
programming jobs are shown under “Programming status”.
Procedure for transmitting programming jobs via an RF-Stick:
1. Proceed with your PC and the RF-Stick connected to it to the locking device into which the
programming jobs are to be transmitted.
If you want to transmit the programming jobs into multiple locking devices, you can freely
choose the sequence in which you look for the locking devices.
Page 74 of 141 Long shield ILS
5.4 Administration with an RF-Stick
Overview: Master media usage
Help & troubleshooting Technical data
Maintenance & disposal
Operation
Administration
Assembly Basics
To Next Page
Loading...
