2. You initialise an RF stick on your PC so that it can work with the OMEGA Client software
(see "Installing RF-Stick for the OMEGA client" below).
3. You specify the locking authorisations, time profiles etc. in OMEGA Client. A detailed
manual is available in the OMEGA Suite Help.
4. Proceed to a locking device with a PC and an RF-Stick connected to it.
5. You establish the connection between the locking device and the RF-Stick through an RF
Stick-Master and transmit the generated programming jobs to the locking device (see
"Transmitting programming jobs with an RF-Stick to a locking device" below). The con-
nection between the locking device and an RF-Stick is automatically disconnected there-
after.
5.4.3 Installing RF-Stick for the OMEGA client
Required administration devices:
l RF-Stick
l PC with OMEGA Client installed
Procedure:
1. Insert the RF-Stick into a free USB socket of a PC with OMEGA Client installed on it.
The RF-Stick driver will be installed automatically.
2. Start the OMEGA Client and log in with your user name and password.
The OMEGA Client detects the RF-Stick automatically. “RF-Stick ready” is displayed now on the
lower bar of OMEGA Client.
The RF-Stick is now initialised.
Troubleshooting:
Problem/Signalling Reason Solution
The OMEGA Client dis-
plays “RF-Stick not author-
ised”.
The RF-Stick belongs to another system
and cannot be use for
the administration of your OMEGA
FLEX system.
Use an RF-Stick with system iden-
tification code for your OMEGA FLEX
system.
5.4.4 Transmitting programming jobs with an RF-Stick to a locking device
Required master media and administration devices:
l RF-Stick-Master
l RF-Stick
l PC with OMEGA Client installed
Long shield ILS Page 73 of 141
5.4 Administration with an RF-Stick
Overview: Master media usage
Help & troubleshooting Technical data Maintenance & disposal Operation
Administration
Assembly Basics
To Next Page
Loading...
