4. Remove the old batteries.
Remove the batteries only by hand. Do not use any
foreign objects for this.
5. Insert the new batteries with correct polarity in the
battery compartment.
Use only the Energizer Ultimate Lithium 1,5V
AAbatteries.
The correct polarity is indicated in the battery
compartment.
6. Use a master media or locking media to check at the
OUTSIDE FITTING, whether the handle set reads the
media.
7. Guide the INSIDE SHIELD over the INSIDE LEVER HANDLE and
push it up to the ASSEMBLY PLATE.
Page96 of 141 Long shield ILS
7.5 Battery management
Overview: Master media usage
Help & troubleshooting Technical data
Maintenance & disposal
Operation Administration Assembly Basics
To Next Page
Loading...
