CHART Orca MicroBulk CO2 Series - Grease Fitting Locations; Pressure Build Heater and Safety Equipment

33
Components & SystemsProduct Manual - Orca
™
CO
2
Series MicroBulk Delivery System
Pressure Build Heater and Safety Equipment
PB Heater (A) is located on the frame behind the fuel tank.
Safety cones (B) may be located anywhere on the truck frame. Wheel chocks (C) and safety ares (D) are in the tool box (E),
which may be located anywhere on the frame.
The optional re extinguisher (F) is located curb side at the cabinet.
A
B
E
D
C
F
Grease Fitting Locations