Creating the Network Object
Gateway Type
Configure the gateway type for a Centrally Managed appliance. Choose one of:
x Standard Gateway
x This Gateway is a member of a cluster
x This Gateway uses a dynamically assigned IP
Web/SSH and GUI Clients Configuration
Define the clients that are allowed to connect to the appliance using a web browser or SSH
client. These clients can manage the appliance using a web or SSH connection.
You can define a Host according to Hostname or IP address. Enter a comma-separated list of
IP addresses from which you manage the appliance. Enter Any to manage the appliance from
anywhere.
Note - You should not use the Any value for security reasons.
After you complete the First Time Configuration Wizard, more options are available using the
WebUI menu.
SIC Setup
Configure the SIC (Secure Internal Communication) settings for a Centrally Managed
appliance. Enter a SIC Activation Key. The same key is used by the gateway object in
SmartDashboard.
Summary
The Summary page opens.
Click Finish to complete the First-Time Configuration Wizard. You can login to the appliance
after several minutes.
Note - You should backup the system configuration. The Backup and
Restore window can be accessed via the WebUI interface, Appliance
> Backup and Restore.
Creating the Network Object
Configure the Check Point 4000 Appliances as a gateway object in the Security Management
Server database.
CP_Toxotai_GettingStartedGuide_426 26CP_Toxotai_GettingStartedGuide_426 26 05 July 2011 1:21:11 PM05 July 2011 1:21:11 PM
To Next Page
Loading...
