Check Point 4600 - Power Supply (Check Point 4800)

Customer Replaceable Parts
Check Point 4000 Appliances Hardware Page 35
Unless directed to do so by Check Point technical support, customers are prohibited by
warranty and support agreements from replacing any parts. Customers are prohibited from
opening the appliance case under any circumstances.
Power Supply (Check Point 4800)
The Check Point 4800 appliance has an optional redundant power supply. This section
explains how to remove and install a power supply or placeholder unit.
Note - If both power supply slots are not populated, a continuous alarm sounds.
Item
Description
1
Power supply unit
2
Extraction handle
3
Release lever
4
Power cord socket
5
Power switch
CP_Toxotai_GettingStartedGuide_435 35CP_Toxotai_GettingStartedGuide_435 35 05 July 2011 1:21:11 PM05 July 2011 1:21:11 PM