Restoring Using the LCD Panel
To restore the appliance to its default factory configuration using the LCD Panel
keys:
1. Reboot or power on the appliance.
2. When the countdown begins, press any of the arrow keys.
The Boot menu appears.
3. Using the arrow buttons, scroll to the relevant default factory image.
4. Press
.
5. Confirm the reset by pressing .
Pressing any other button causes the Action Canceled message to display:
At this point, pressing any key returns you to the boot menu.
6. Once you have confirmed the reset, wait for the appliance to restore the factory image.
While the appliance is restored to the default image, this message is continuously
displayed: Reverting image don't turn off.
After the appliance is restored to its default factory configuration, the appliance reboots and
the initializing message appears.
To Next Page
Loading...
