Chapter 5
Restoring Factory Defaults
As part of the troubleshooting process, it may be necessary to restore the appliance to its
factory default settings.
You can restore your appliance to the factory default image using one of the following methods:
x Using the WebUI
x Through the console boot menu
x Using the LCD panel
Important - Restoring factory defaults deletes all information on the
appliance.
In This Chapter
Restoring Using the WebUI 39
Restoring Using the Console Boot Menu 40
Restoring Using the LCD Panel 41
Restoring Using the WebUI
To restore the appliance to its default factory configuration using the WebUI:
1. In a Web browser, navigate to
https://<appliance_ip_address>:4434
2. Log in to the WebUI of the appliance using your administrator username and password.
3. In the WebUI, click Appliance > Image Management.
The Image Management window opens:
4. Select the relevant image version you wish to revert to.
5. Click Revert.
CP_Toxotai_GettingStartedGuide_439 39CP_Toxotai_GettingStartedGuide_439 39 05 July 2011 1:21:11 PM05 July 2011 1:21:11 PM
To Next Page
Loading...
