CHINT NVF5 Series - Page 144

NVF5 Series User Manual Appendix B Parameter list
Code
Name
Setting Range
Default
Change
Thousands Place ： External
Fault-
E.EF （
Same as ones
place）
FE.39
Protection Selection2
in Fault Mode
0x0000 ~ 0x2222
Ones Place：Comm. Abnormal
-E.CE
0：Coast Stop
1：Stop per Stop Mode
2：Keep Running
Tens Place：Reserve
Hundreds Place ：
EEprom
Abnormal-E.EEP
0：Coast Stop
1：Stop per Stop Mode
Thousands Place
：
Reserve
0x0000
○
FE.40
Protection Selection3
in Fault Mode
0x0000 ~ 0x2222
Ones Place：Load Loss-E.LL
0：Coast Stop
1：Decel. Stop
2 ：
Keep Running by
Skipping to 7% Motor Rated
Frequency，Recover to setting
frequency when load recover
Tens Place：
PID Feedback Loss
in Running Mode-E.FbL
0：Coast Stop
1：Stop per Stop Mode
2：Keep Running
Hundreds Place ： Excessive
Speed Deviation
- E.dEv（Same
as tens place）
Thousands Plac ：
Motor Over
Speed-E.OS （
Same as tens
place）
0x0000
○
FE.41
Protection Selection4
in Fault Mode
0x0000 ~ 0x2222
Ones Place：Reserve
Tens Place：Reserve
Hundreds Place：Reserve
Thousands Plac
：
Reserve
0x0000
○
FE.42
Protection Selection5
in Fault Mode
0x0000 ~ 0x2222
Ones Place：Reserve
Tens Place：Reserve
Hundreds Place：Reserve
0x0000
○
- 140 -